You are here: Home > Articles > Mold In Carpet

Cleaning Carpet Mold

In many mold problems that occur in the home, the carpeting is a prime suspect to cause some serious problems. What you will find out is carpeting is a good source for black mold and mildew. Carpet mold amplifies from moisture and usually when any of your carpets are wet from foot paths, moisture intrusion or simply spilled milk. The fibers in the carpeting will hold moisture and this is usually where you will see a mold and mildew problem start. Cleaning carpet mold is strategic, but if done properly you can salvage many moldy carpets.

Common Causes of Carpet Mold

Carpets are best if kept dry, but let's face it if you are reading through this article then you already have a carpet mold problem. This is okay, because there is solutions. First, let's discuss what are some of the most common causes of carpet mold from the thousands of inspections mold inspectors have discussed with us.

  • Wet Foot Traffic - Over thousands of inspections, carpet mold is most likely found around the front doors and bathroom rugs. This is because of the trails of water that foot traffic brings into your home. The best solution to wet foot traffic is using a pre-soak rug to have visitors wipe there feet down. This is almost mandatory in bathrooms with carpeting

  • Moisture Intrusion - It is important to take a look at perimeter walls and windows. If they appear or had some sort of cracking a good rule of thumb is to check under them. Water flows downward so this usually means if you have carpeting under the window sills, by the front doors, patios and have carpeting nearby then you may have carpet mold. A solution to finding this mold is to pick up the carpeting and look at the "wooden" tack strips, if they have moisture stains or visual mold you may likely have some moisture intrusion happening.
These are two very popular causes of carpet mold, be sure to have a thorough investigation yourself of any suspect areas.

How To Inspect For Mold In Carpets

It is important to identify where your mold is coming from, if you suspect that there is mold and mildew in your carpets, then these guidelines below will surely help you find the source of the problem.

  • Check Perimeter Walls - Moisture intrusion happens more likely than not from perimeter walls. The simple fact that mildew and mold amplifies with moisture. Outdoors has a good way of getting water indoors into your basement, bedrooms, kitchens etc. To spot check these areas, do a inspection by picking up the carpets along the perimeter walls and see if the "wooden" tack strips are damp or have visible moisture. If so, follow the water line up and around to find the source of the problem.

  • Check Cracked Sills - Funny enough, there has been plenty of cases where carpeting was horribly wet from a small crack in the window sill. Water finds a way to run down to your carpeting. You will want to look for moisture stains on the walls under the window sills. Also, try giving a look at the cracks of the corners of the sills. If it looks like there is moisture damage you may need to pop up the sill to see if there is mold and mildew that has dropped down to the carpeting.

  • Check By Doorways - Front doors and patio doors give in to floods. Most times the home is not elevated enough and water does intrude into your home and stains your carpeting. You may not see the moisture stains because they are below the carpeting, but after a few weeks... the mold will grow on your carpeting if the environment is right. To prevent the mold and mildew from growing, be sure to check for cracks in your doorways and if there is any moisture damage. The cracking will be a sure sign of some previous moisture intrusion.

  • Check Under Beds - There was a few cases in which bed sets actually trapped in air and caused the carpeting under the set to create moisture and humidity. It was simply amazing, that the air was compacted and squeezed under the bed set that there was moisture that was created. So if your bed seals a select area that does not allow air to pass, be sure to give it a look to see if you get carpet mold and mildew.
It is important to keep humidity values down and moisture to a minimum. By using air purifiers and correct air flow, you will lessen the probability of black mold growing on your carpets.

What To Do When You Have Carpet Mold

The most important task to carry out if you have carpet mold is to find the source of the problem. Before you can kill carpet mold, you will need to find the source.

So let's get re mediating your mold problem.

You will need to make a judgment call how bad the damage is. In most cases, when there is heavy moisture damage on the carpeting it is best to remove the carpeting and all the tack strips.

If you feel you can salvage the carpet, then you need to attack the mold and mildew on the carpet fibers. If the carpet has mold and mildew on only the surface than you can simply use a natural cleaning product that can kill mold and prevent it from coming back.

It is not recommended to use bleach as this will stain the carpeting and bleach is a not a solid solution to getting rid of mold and keeping the spores away for good.

So If No Bleach Than What Can I Use?

Preferably an organic solution that will clean and protect. The protection part is important, this will keep this mold and mildew problem in your carpet from coming back. In cases with carpet mold, you can use an organic mold cleaner such as Molderizer and then follow up with the patented organic mold prevention product called Safe Shield.

These products are tested and signed by OCI chemist. This means they work and have been formulated with mold cleaning in mind. The patented formulations from Property Perfections are amazing and have been now encompassed as the most popular mold cleaning and prevention products for the Indoor Air Quality industry.

It is best to use the mold kit to clean carpet mold. The carpet mold needs to be cleaned and removed using Molderizer. This is a extra strength organic cleaning product to kill mold.

Once you kill the mold and mildew, you then need to consider the prevention. With Safe Shield, you can clean and protect any surface by creating a shield that encapsulates the area to prevent mildew and mold amplification. In many cases it is recommended to use the natural mold kits for cleaning carpet mold.

"Have Questions About Carpet Mold and Mildew?"


cleaning carpet mold